BQJZY - AA648N WOOD DOUGH (ALL COLORS)
- MSDS: BQJZY
- Manufacturer: DAP INC
- Product Name: AA648N WOOD DOUGH (ALL COLORS)
- National Stock Number: 8030-00F026788
Product Identification
Product ID:AA648N WOOD DOUGH (ALL COLORS)
MSDS Date:07/25/1991
FSC:8030
NIIN:00F026788
MSDS Number: BQJZY
Responsible Party
DAYTON, OH 45401-0277
US
Emergency Phone: 513-667-4461
Info Phone: 800-543-3840
Cage: 90300
Contractor
Telephone: 513-253-7154/800-543-3840
Cage: 90300
Ingredients
RUBBER SOLVENT (NAPHTAH SOLVENT REFINED, LIGHT) *92/4*
CAS: 64741-84-0
Fraction By Weight: 5-15%
ACETONE; DIMETHYL KETONE
CAS: 67-64-1
RTECS: AL3150000
Fraction By Weight: 10-20%
OSHA PEL 1000PPM
ACGIH TLV: 750PPM/1000STEL;9293
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
2-BUTANONE (METHYL ETHYL KETONE) (MEK)
CAS: 78-93-3
RTECS: EL6475000
Fraction By Weight: 5-10%
OSHA PEL 200 PPM
ACGIH TLV: 590 MG/CUM
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
ISOPROPANOL (ISOPROPYL ALCOHOL), 2-PROPANOL, DIMETHYL
CAS: 67-63-0
RTECS: NT8050000
Fraction By Weight: 5-10%
OSHA PEL 400 PPM
ACGIH TLV: 400 PPM
457 G/L (FOR MATERIAL & LESS WATER LESS
RTECS: 9999999VO
WET NITROCELLULOSE, NITROCELLULOSE, NITRATE CELLULOSE
CAS: 9004-70-0
RTECS: QW0975200
Fraction By Weight: 5-15%
DIBUTYL PHTHALATE, DI-N-BUTYL PHTHALATE
CAS: 84-74-2
RTECS: TI0875000
Fraction By Weight: <5%
OSHA PEL 5 MG/CUM
ACGIH TLV: 5 MG/CUM
EPA Report Quantity: 10 LBS
DOT Report Quantity: 10 LBS
Hazards
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES/SKIN: IRRITATION. INHALATION:
NOSE & RESPIRATORY TRACT IRRITATION/HARMFUL. MAY AFFECT
BRAIN/NERVOUS SYSTEM CAUSING DIZZINESS/HEADACHE/NAUSEA. INGESTION:
VOMITING, DIARRHEA, & DEPRESSED RESPIRATIO N. HARMFUL OR FATAL.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IF DRY SANDED, EXPOSURE TO DUST MAY RESULT IN
BUILD-UP OF MATERIAL IN EYES/EARS/NOSE/MOUTH WHICH MAY CAUSE
IRRITATION. INHALATION: PERMANENT BRAIN/NERVOUS SYSTEM DAMAGE. DUST
(AS RESULT OF DRY SANDING ) MAY RESULT IN PULMONARY &
RESPIRATORYDAMAGE. SKIN: DEFATTING LEADING TO DERMATITIS.
First Aid
First Aid:EYES: FLUSH W/LARGE AMOUNTS OF WATER FOR 15 MINS. SKIN: WASH
IMMEDIATELY W/SOAP & WATER. INHALATION: REMOVE TO FRESH AIR.
INGESTION: DON'T INDUCE VOMITING. OBTAIN MEDICAL ATTENTION IN ALL
CASES.
Fire Fighting
Flash Point Method:TOC
Flash Point:<20F
Extinguishing Media:FOAM, CO2, OR DRY CHEMICALS
Fire Fighting Procedures:FULL PROTECTIVE EQUIPMENT, INCLUDING
SELF-CONTAINED BREATHING APPARATUS, IS RECOMMENDED TO PROTECT FROM
COMBUSTION PRODUCTS. COOL EXPOSED CONTAINERS W/WATER.
Unusual Fire/Explosion Hazard:CONTAINERS MAY EXPLODE IF EXPOSED TO
EXTREME HEAT. FLAMMABLE LIQUID. VAPORS ARE HEAVIER THAN AIR & WILL
COLLECT IN LOW AREAS.
Accidental Release
Spill Release Procedures:USE ABSORBENT MATERIAL OR SCRAPE UP DRIED
MATERIAL & PLACE INTO CONTAINERS.
Handling
Handling and Storage Precautions:KEEP TIGHTLY CLOSED WHEN NOT IN USE.
KEEP FROM EXCESSIVE HEAT & FREEZING. DON'T STORE AT TEMPS >120F.
STORE AWAY FROM CAUSTICS & OXIDIZERS.
Other Precautions:KEEP OUT OF REACH OF CHILDREN. INTENTIONAL MISUSE BY
DELIBERATELY CONCENTRATING & INHALING VAPORS MAY BE HARMFUL OR
FATAL.
Exposure Controls
Respiratory Protection:IF 8-HOUR EXPOSURE LIMIT OR VALUE IS EXCEEDED
FOR ANY COMPONENT, USE AN APPROVED NIOSH/OSHA RESPIRATOR. CHECK ALL
LOW AREAS FOR VAPOR BEFORE ENTERING.
Ventilation:SUFFICIENT MECHANICAL (LOCAL/GENERAL EXHAUST): TO MAINTAIN
EXPOSURE BELOW PEL & TLV.
Protective Gloves:SOLVENT IMPERVIOUS
Eye Protection:GOGGLES OR SAFETY GLASSES W/EYE SHIELDS
Other Protective Equipment:EYEWASH & SOLVENT IMPERVIOUS APRON, BARRIER
CREAMS MAY BE USED.
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE.
Supplemental Safety and Health
Chemical Properties
Vapor Pres:185
Vapor Density:>1
Spec Gravity:1.19
Evaporation Rate & Reference:(BU AC = 1): >1
Solubility in Water:NEGLIGIBLE
Appearance and Odor:STIFF DOUGH W/STRONG SOLVENT ODOR.
Percent Volatiles by Volume:30-35%
Stability
Stability Indicator/Materials to Avoid:YES
OXIDIZING OR CAUSTIC MATERIALS
Stability Condition to Avoid:EXTREME HEAT, ELECTRICAL EQUIPMENT,
SPARKS, OPEN FLAMES, & OTHER SOURCES OF IGNITION, FREEZING
Hazardous Decomposition Products:NORMAL COMBUSTION PRODUCTS SUCH AS CO,
CO2, & NITROGEN OXIDES
Disposal
Waste Disposal Methods:DISPOSE OF ACCORDING TO FEDERAL, STATE, & LOCAL
REGULATIONS. DISCARDED MATERIAL SHOULD BE INCINERATED AT PERMITTED
FACILITY. DON'T REUSE EMPTY CONTAINER. FLAMMABLE LIQUID. UN1993.
D001 (IGNITABLE).
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.